Laser transformation hardening of metal sheets under air and water environment

Authors

  • Pallav Raj Indian Institute of Technology Bhubaneswar, Bhubaneswar, India
  • Yogesh Kumar Karn Indian Institute of Technology Bhubaneswar, Bhubaneswar, India
  • Suvradip Mullick Indian Institute of Technology Bhubaneswar, Bhubaneswar, India
  • Gaurav Bartarya Indian Institute of Technology Bhubaneswar, Bhubaneswar, India

DOI:

https://doi.org/10.58368/MTT.22.3.2023.1-7

Keywords:

Laser Surface Treatment, Transformation Hardening, Water Environment, Mild Steel, Micro-Hardness

Abstract

Laser transformation hardening is a type of surface treatment process for localized hardening of material surface with high control on hardening depth. Further, laser hardening is a self-quenching process with high cooling rate. The current study presents the laser transformation hardening of mild steel under dry and wet environments with single and multi-passes, where the wet environment was created by providing a water-jet parallel to the work-piece surface. The main objective is to study the effect of wet environment on the hardness values and hardening depth in the modified zone due to enhanced cooling. Further, the effect of process parameters, like scan speed, laser power and number of passes on the enhancement of the hardness is also studied. Results indicate significant improvement in the micro-hardness of the treated surface in a water environment under both single and multi-pass conditions.

Metrics

Metrics Loading ...

References

Bajpei, T., Chelladurai, H., & Ansari, M. Z. (2017).Experimental investigation and numerical analyses of residual stresses and distortions in GMA welding of thin dissimilar AA5052-AA6061 plates.J. Manuf. Processes, 25, 340-3507.

Lambiase, F. (2012).An Analytical Model for Evaluation of Bending Angle in Laser Forming of Metal Sheets, J. Mater. Eng. Perform., 21, 2044-2052.

Lee, J. H., Jang, J. H., Joo, B. D., Yim, H. S., & Moon, Y. H. (2009). Application of direct laser metal tooling for AISI H13 tool steel, Trans. Nonferrous Met. Soc. China, 19, 284-287.

Lu, Y. ,Ehle, L. C., Richter, S., &Radel, T. (2021). Influence of multi-pass laser hardening of normalized AISI 4140 on the grain size, Surf. Coat.Technol., 421, 127434.

Maharjan, N., Zhou, W. , Zhou, Y., & Wu, N. (2019). Underwater laser hardening of bearing steels, J. Manuf. Process., 47, 52-61.

Mullick, S., Madhukar, Y. K., Roy, S., &Nath, A. K. (2015). An investigation of energy loss mechanisms in water-jet assisted underwater laser cutting process using an analytical model, Int. J. Mach. Tools Manuf., 91, 62-75.

Nath, A.K., & Sarkar, S. (2018). Laser transformation hardening of steel, Advances in Laser Materials Processing, 2nd ed. Woodhead Publishing, 257-298.

Rigas, N., &Merklein, M. (2020) Experimental Investigation of distortion behaviour of laser heat treated blanks. Procedia CIRP, 94, 557-560

Roy, A., & Manna, I. (2001).Laser surface engineering to improve wear resistance of austempered ductile iron, Mater.Sci. Eng. A, 297, 85-93.

Sakate, P. M., Mullick, S., &Gopinath, M. (2021). An Investigation on physical phenomena of water-jet assisted underwater wet laser welding technique under continuous and pulsed mode operation, Optik, 242, 167272.

Salleh, M. N. M., Ishak, M., Aiman, M. H., Zaifuddin, Q., &Quazi, M.M. (2020). The effect of laser surface hardening on the surface hardness of mild steel, IOP Conf. Series: Materials Science and Engineering, 788, 012014.

Sarkar, S., Gopinath, M., Chakraborty, S.S., Syed, B., &Nath, A.K. (2016). Analysis of temperature and surface hardening of low carbon thin steel sheets using Yb-fiber laser, Surf. Coat. Technol., 302, 344-358,

Telasang, G., Dutta, J., Majumdar, Padmanabham, G., & Manna, I. (2015).Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel, Surf.Coat. Technol., 261, 69-78.

Vollersten, F. (1996).Laserstrahlumformen - LasergestützteFormgebung: Verfahren, Mechanismen, Modellierung. Meisenbach

Downloads

Published

01-03-2023

How to Cite

Raj, P., Karn, Y. K., Mullick, S., & Bartarya, G. (2023). Laser transformation hardening of metal sheets under air and water environment. Manufacturing Technology Today, 22(3), 1–7. https://doi.org/10.58368/MTT.22.3.2023.1-7

Issue

Vol. 22 No. 3 (2023): March 2023

Section

Articles

License

All the articles published in Manufacturing Technology Today (MTT) Journal are held by the Publisher. Central Manufacturing Technology Institute (CMTI) as a publisher requires its authors to transfer the copyright prior to publication. This will permit CMTI to reproduce, publish, distribute, and archive the article in print and electronic form and also to defend against any improper use of the article.