Modal analysis of self-aligning ball bearing using finite element method

Authors

  • Navdeep Minhas Department of Mechanical Engineering, NITTTR, Chandigarh, Chandigarh, India
  • S. S. Banwait Department of Mechanical Engineering, NITTTR, Chandigarh, Chandigarh, India

Keywords:

Finite Element Model, Vibration Analysis, Transient Structural Analysis

Abstract

The present work consist of vibration analysis of self-aligning ball bearing using simulation. The structural analysis of bearing help us to predict service life. The incipient defects are hard to predict and analyze. The time domain and frequency domain analysis were two major area’s used to predict the defects in the bearings. In the present work, the finite element model of the bearing SKF 1205 EKTN9 was created using commercial modeling software and further, analyzed with ANSYS Workbench for the acceleration in Y-direction and results were compared with the standard analytical method.

Metrics

Metrics Loading ...

Downloads

Published

01-03-2020

How to Cite

Minhas, N., & Banwait, S. S. (2020). Modal analysis of self-aligning ball bearing using finite element method. Manufacturing Technology Today, 19(3-4), 28–34. Retrieved from https://mtt.cmti.res.in/index.php/journal/article/view/147

Issue

Vol. 19 No. 3-4 (2020): March-April 2020

Section

Articles

License

All the articles published in Manufacturing Technology Today (MTT) Journal are held by the Publisher. Central Manufacturing Technology Institute (CMTI) as a publisher requires its authors to transfer the copyright prior to publication. This will permit CMTI to reproduce, publish, distribute, and archive the article in print and electronic form and also to defend against any improper use of the article.